Arthur Oskan
TRIBE Member
Gear for Sale
Just popping in to post some gear that I've got up for grabs.
Boss SE-50 $250
*awsome vocoder and analog distortion.
*other fx: delay, reverb, chorus,
*patches can be built from the ground up.
Alesis Midiverb (original) $150
*12-bit present reverbs and gates.
*one word....deepdubbytechno.
Korg Poly 61m $400
*Korg's answer to the Juno 106; analog DCO 6 voice poly
*Great pads, basses, etc
*Triggerable Arpeggiator (+5v)
*Joystick for bizarre modulation
*Midi IN/OUT
Roland R-8 with 808/909/CR78 ROM Cards. $500
*8 outputs + stereo
*sounds are tweakable; decay, pitch, amp etc.
*pattern based sequencing (compared to Akai MPC Series)
*64 internal sounds, acoustic, later percs, jazz etc
Clavia Nord Rack 2. $1350
*techno!
*knobs all send and receive midi
*mint with box and manuals
Kenton PRO-2000 Midi to CV Converter $625
*2 channel converter with DIN sync output (for older Roland XOX gear)
*perfect to control analog synths via midi
*KADI port installed by Kenton (paid $85 alone), to control a fitted an 808
(you need to have your drum machine fitted! $35 through Kenton, via their website. Unfortunatly, I cannot remove mine, as it's part of my 808
*Full Midi Implementation
*CV/GATE + Trigger outputs
*LFO’s of various shapes, all controllable via midi.
OEX-6sr Ensoniq Output Expander $225
*6 output expander for EPS or EPS-16+ keyboard.
*includes cable
Roland TR-727 $250
*latin special
Roland M24E 24 Channel Mixer $650
*24 mono inputs, 4 Aux Sends , 4 band EQ w/ midsweep.
*smallest ever 24 channel board: A little over 2 ft long and a foot deep!
*great shape and all the channels work; just needs a little contact cleaner.
Everyone can either post here or e-mail me directly if you need to know anything else!
peace,
Arthur Oskan
aoskan@sympatico.ca
Just popping in to post some gear that I've got up for grabs.
Boss SE-50 $250
*awsome vocoder and analog distortion.
*other fx: delay, reverb, chorus,
*patches can be built from the ground up.
Alesis Midiverb (original) $150
*12-bit present reverbs and gates.
*one word....deepdubbytechno.
Korg Poly 61m $400
*Korg's answer to the Juno 106; analog DCO 6 voice poly
*Great pads, basses, etc
*Triggerable Arpeggiator (+5v)
*Joystick for bizarre modulation
*Midi IN/OUT
Roland R-8 with 808/909/CR78 ROM Cards. $500
*8 outputs + stereo
*sounds are tweakable; decay, pitch, amp etc.
*pattern based sequencing (compared to Akai MPC Series)
*64 internal sounds, acoustic, later percs, jazz etc
Clavia Nord Rack 2. $1350
*techno!
*knobs all send and receive midi
*mint with box and manuals
Kenton PRO-2000 Midi to CV Converter $625
*2 channel converter with DIN sync output (for older Roland XOX gear)
*perfect to control analog synths via midi
*KADI port installed by Kenton (paid $85 alone), to control a fitted an 808
(you need to have your drum machine fitted! $35 through Kenton, via their website. Unfortunatly, I cannot remove mine, as it's part of my 808
*Full Midi Implementation
*CV/GATE + Trigger outputs
*LFO’s of various shapes, all controllable via midi.
OEX-6sr Ensoniq Output Expander $225
*6 output expander for EPS or EPS-16+ keyboard.
*includes cable
Roland TR-727 $250
*latin special
Roland M24E 24 Channel Mixer $650
*24 mono inputs, 4 Aux Sends , 4 band EQ w/ midsweep.
*smallest ever 24 channel board: A little over 2 ft long and a foot deep!
*great shape and all the channels work; just needs a little contact cleaner.
Everyone can either post here or e-mail me directly if you need to know anything else!
peace,
Arthur Oskan
aoskan@sympatico.ca